Introducing the parts of the stone cutting machine
In 1397, after three years of field research and negotiations with world-renowned companies in Italy, Germany, Spain and the United States, Henza Company has constructed a construction machinery factory with an area of one thousand square meters in the Zagros Industrial City.
According to the International Iranian Stone Exhibition, according to Hanza, the company's current focus is specifically on the production of stone cutting machines with state-of-the-art technology and with the participation of European engineers. Cutting plates for stone cutting machine:
1- In terms of internal diameter (motor shaft)
2- In terms of external diameter
3- In terms of segment gender
4- In terms of cutting diameter (plate diameter)
5- In terms of useful life of the cutting plate
In terms of internal diameter (motor shaft):
The motor of portable devices is generally one inch (twenty-five and four millimeters), but there are other standards for different devices, which include the following dimensions.
Twenty-five and four millimeters for direct and portable powertrains where the cutting plate is mounted directly on the motor.
Thirty-two millimeters for special motors.
Fifty sixty millimeters for workshop machines where power transmission is applied indirectly to the cutting plate.
In terms of external diameter:
Plates that can be installed on portable devices in the size of two hundred and fifty millimeters can be installed on indirect transmission devices (workshop) and devices with flat motors.
Generally, the final outer diameter of the cutting plate depends on the needs of the consumer and also the size of the protective frame of the cutting plate, but it can be installed up to three hundred and fifty on the company's portable devices.
In terms of segment material:
In general, there are two color spectrums in the segments for stone and ceramics, which include silver and gold. The more the color spectrum of the segment tends to be golden, the more suitable it is for marble, and the closer the color of the segment is to silver, the more suitable it is for granite. The cuts used on them are always listed and the buyer must pay attention to the inscriptions on the cutting plate. Travertine stones, because they are less hard than granite, marble and ceramic, can be used with all these models of cutting plates. .
The segments are also connected to the cutting board in different ways, which are divided without grooves, hair grooves and grooves, which produce less noise than grooves without grooves and grooves, so-called silent, but completely silent pages. Two cutting plates, one of which is generally copper, to reduce plate vibration and produce much less noise during cutting.
In terms of cutting diameter (plate diameter)
Slab contraction joints should intersect at the openings for columns, and should intersect at the openings for columns, and should intersect at the openings for columns and marbles. It should be noted that the diameter of the segment is always greater than the diameter of the cutting plate to prevent the plate from getting stuck and hitting the cutting point of the stone and to be faster in cutting.
In terms of shelf life of the cutting plate:
The useful life of the cutting plate is completely related to the type of segment, the cutting plate used and the adjustment of the machine. Unfortunately, the material of the segment is not distinguishable from the appearance of the plate, and only the size of the diamond grains can be seen from the appearance of the segment. Preferably buy from the main cut page and from reputable stores.
The use of the cutting plate means that if you have purchased a porcelain cutting plate and now need to cut granite or marble, you must buy a separate plate because cutting unauthorized materials will damage the segment and the plate.
Adjusting the stone cutting machine plays an important role in the life of the machine because if the motor of your machine or the plate itself is not done by experts, it will cause vibration, warping, breaking and falling of the plate segments. do.
* ISNA
