Portable stone cutting machine
Henza Company is a group of young people with a lot of motivation and perseverance, which in 1397, after three years of field research and negotiations with world-renowned companies, has started to build a factory for manufacturing construction machinery with an area of one thousand square meters in Zagros Industrial Park. Currently, the company focuses specifically on the production of stone cutting machines with the latest technology in the world and with the participation of European engineers.
According to the International Stone Exhibition of Iran, according to Hanza, we will continue to examine the portable stone cutting machine (portal).
Portable stone cutting machine (portal)
Different models of portable stone cutting machine (portable) in terms of engine type:
1: Direct power transmission
2 Power transmission with belt
Direct power transmission stone cutting machine:
In this model, the engine stone cutting machine can be designed as single phase or three phase. In this model, the engine power is directly proportional to the cutting diameter, which means that if we strengthen the engine, the engine size will be larger and as a result, it will cut a thinner stone. Therefore, the standard engine in this model is a three-horsepower engine (two One thousand two hundred watts.
Power transmission stone cutting machine with belt:
This model is commonly used in workshops because the heavy chassis weight of this model makes it difficult to move, and the engine of these devices is designed from five horsepower and above in two single-phase and three-phase modes. The disadvantage of this mode is that part of the engine power is spent on moving the belts and cutting plate indirectly, which is considered a loss, and also the belts and the moving system of the cutting plate need to be inspected.
Models of portable stone cutting machine in terms of engine and wagon movement:
Chrome shaft cutting machine
Linearide rail cutting machine
Workshop stone cutting machine
Chrome shaft model:
Iranian chrome shaft devices generally have forty millimeter shafts, which fail over time and cannot be fixed. External chrome-plated stone cutting machines have fifty millimeter shafts that have higher strength and less error. The engine and water pump in these devices are similar to rail devices, but the car's carriage on which the engine is mounted is weaker. Chrome shaft devices are suitable for ceramic cutting and sizes below one and a half meters. Chrome shaft devices do not weigh much with the rail model due to the difference in your shafts.
Liner Guide Rail Model:
Rail stone cutting machines (Liner Guide rails) have a long lifespan and are not faulty if properly maintained. In this model, the wagon and the motor move on two rails with four special bearings, which minimize errors and vibration in the cut. Generally, these models of devices are produced from one and a half meters to two and six meters as portable (portable) and three and three meters as workshops in Iran.
Workshop model:
In the model of the stone cutting machine, the power is transferred to the connection point of the cutting plate by the belt, and the adjustment of the cutting plate is done by two other motors. In this model, due to the weight of the wagon and the fixed engine and the tray (table) of the mobile device, it is made.
